Convert mg/g to percent (w/w), or percent back to mg/g, with ppm, g/kg and mg/100 g equivalents, plus batch amounts and mg/mL to % w/v.

Convert mass fraction. Percent is by mass (w/w); ppm here is mg/kg.

A component mass fraction cannot exceed 100% (1000 mg/g).

Optional settings


Related Calculators

Calculator Functions

FunctionWhat it doesWhat it requires
mg/g to percent (or percent to mg/g)Converts a concentration between mg/g and percent by mass, in either directionRequires one concentration in mg/g, % w/w, g/kg, mg/100 g, mg/kg, ยตg/g or ppm
Target batchFinds how much pure component a batch needs to reach a target concentrationRequires the final batch mass in grams and the target concentration
Concentration from totalsFinds the concentration of a mixture from what went into itRequires the component mass in mg or g and the final total mass in grams
Solution concentrationConverts between mg/mL and percent weight in volume for a liquidRequires one concentration in mg/mL or % w/v

The first three functions work by mass and report the result as % (w/w), mg/g, g/kg, mg/kg, ppm by mass and mg/100 g together. A mass concentration above 1,000 mg/g is rejected, because a component cannot be more than 100% of the mixture it is part of.

mg/g to Percent Formulas

P = C รท 10 [1]
PConcentration in percent by mass (% w/w)
CConcentration in milligrams of component per gram of mixture (mg/g)

One milligram is 0.001 g, so 1 mg/g is a mass fraction of 0.001. The percent sign stands for the number 0.01 [1], which makes 0.001 equal to 0.1%. Dividing mg/g by 10 therefore gives percent, and multiplying percent by 10 gives mg/g. A percent by mass is grams of component in 100 g of mixture [2].

mg/g to percent (or percent to mg/g)

1 mg/g is 0.1%, 10 mg/g is 1% and 25 mg/g is 25 รท 10 = 2.5%. In the other direction, 2.5% is 2.5 ร— 10 = 25 mg/g. The same mass fraction in other units follows from the prefixes: 1 mg/g = 1 g/kg = 1,000 mg/kg = 1,000 ppm by mass = 100 mg/100 g. A value in mg/100 g is divided by 1,000 to get percent, so 378 mg/100 g is 0.378%.

mg/gPercent (w/w)ppm (mg/kg)mg/100 g
0.10.01%10010
0.250.025%25025
0.50.05%50050
10.1%1,000100
20.2%2,000200
50.5%5,000500
101%10,0001,000
202%20,0002,000
252.5%25,0002,500
505%50,0005,000
10010%100,00010,000
20020%200,00020,000
50050%500,00050,000
1,000100%1,000,000100,000

Target batch

m = M ร— C รท 1,000

m is the mass of pure component in grams and M is the final batch mass in grams, component included. A 500 g batch at 20 mg/g needs 500 ร— 20 รท 1,000 = 10 g of component and 490 g of base.

Concentration from totals

C = m ร— 1,000 รท M

With m in grams and M the final total mass in grams, 250 mg of component in 50 g of finished mixture is 0.25 ร— 1,000 รท 50 = 5 mg/g, or 0.5%. The total has to include the component itself.

Solution concentration

% (w/v) = mg/mL รท 10 [2]

Percent weight in volume is grams of component in 100 mL of solution [2], so 1% (w/v) is 1 g per 100 mL, or 10 mg/mL. A 9 mg/mL solution is 0.9% (w/v). The result is also given in g/L and mg/100 mL.

Limits of This Estimate

  • mg/g and mg/mL describe different things. Turning one into the other needs the density of the mixture in g/mL, which the calculator does not ask for.
  • ppm here means mg/kg, a ratio of masses. A ppm figure by volume or by number of molecules is a different quantity, and NIST advises stating the units, such as mg/kg, instead of ppm [1].
  • Target batch assumes a pure component added to a base that contains none of it. It does not work out the dilution of a stock that is already a mixture.

Sources

  1. NIST, Guide for the Use of the International System of Units (SP 811), Sections 7.10.2 and 7.10.3: the percent sign as the number 0.01, mass fraction written as g/kg, and the advice on ppm
  2. FDA, Strength Conversion in Drug Listing: w/w as grams in 100 g and w/v as grams in 100 mL of solution