Calculate percentage volume decrease, find final volume from an initial volume and rate, or determine the original volume from a final value.

Optional settings

Calculator Functions

FunctionWhat it doesWhat it requires
Percentage decreaseFinds how far a volume fell as a percentage of its starting valueRequires the initial volume and the final volume
Final volume after decreaseFinds the volume left after a percentage decreaseRequires the initial volume and the decrease rate in percent
Initial volume before decreaseFinds the starting volume from what is left and the percentage lostRequires the final volume and the decrease rate in percent

Volumes are entered in mL, L, m³, ft³, in³ or US gallons, and the initial and final volume can use different units. A result unit sets how volumes are shown. Every result also lists the volume decrease, which is the initial volume minus the final volume.

Volume Decrease Formulas

DR = (IV − FV) ÷ IV × 100
DRDecrease rate (%)
IVInitial volume
FVFinal volume, in the same unit as IV

Percentage decrease

The main formula applies directly. A volume that falls from 500 L to 400 L has decreased by (500 − 400) ÷ 500 × 100 = 20%, a drop of 100 L. If the final volume is larger than the initial volume, the result is negative, which marks an increase. The initial volume must be above zero.

Final volume after decrease

FV = IV × (1 − DR ÷ 100)

500 L reduced by 20% leaves 500 × 0.8 = 400 L. The rate can run from 0% to 100%, and 100% leaves nothing.

Initial volume before decrease

IV = FV ÷ (1 − DR ÷ 100)

If 400 L is left after a 20% decrease, the starting volume was 400 ÷ 0.8 = 500 L. Note that this is not 400 plus 20%, which would be 480 L: the percentage is always taken from the starting volume. A 100% rate is not accepted here, because any starting volume would fit.

Mixed units are converted to liters first, with 1 m³ = 1,000 L, 1 ft³ = 28.316846592 L, 1 in³ = 0.016387064 L and 1 US liquid gallon = 3.785411784 L.