Calculate price per yard, total material cost, or required length from any two values, with conversions between yards, feet, inches, meters, and centimeters.

Divide the total cost by the material’s linear length. A yard is a unit of length, not area or volume.

Use the selected currency consistently for total and unit price.

Choose the actual linear length unit. Unit changes preserve the entered quantity.

Currency

Currency labels and display only; this does not convert exchange rates.

Assumptions Read first
  • Linear pricing model: Total Price = Price per unit length × Total Length.
  • All calculations use yard as the internal base unit. Exact definitions: 1 yd = 3 ft = 36 in = 0.9144 m = 91.44 cm; 1 m ≈ 1.0936133 yd.
  • Choose what to find, then enter its two required values. The calculator shows only the relevant numeric inputs. Enter unit rates per linear yard.
  • Length and rate cannot be zero when they are used as divisors; the tool alerts on invalid inputs.
  • Currency: Select USD, EUR, GBP, CAD, AUD, INR or JPY under Currency. All monetary inputs use that same currency; no exchange-rate conversion occurs. Separate taxes, fees, waste/overage and discounts are not included unless incorporated in your inputs.
When to Use This Calculator
  • Estimate a total cost from a known unit rate and required length.
  • Derive a unit rate ($/yd, $/ft, or $/m) from a total quote and length.
  • Convert pricing between $/yd, $/ft, and $/m for consistent comparisons.
  • Quickly price length-based materials (e.g., fabric, carpet, rope, wire, turf).
Input Definitions
  • Price ($) — Total cost for the entire length.
  • Total Length — Linear quantity of material; choose yd, ft, in, m or cm. Input unit changes preserve quantity; choose the desired output unit in Material length mode.
  • Price Per Length — Unit price per linear yard in the selected currency. Equivalent prices per ft, in, m and cm appear in the results.
  • Formulas — Price = Rate × Length; Length = Price ÷ Rate; Rate = Price ÷ Length. Units are converted automatically with yard as the internal base.

Price Per Yard Formula

PPyd = P / L

Variables:

  • Ppyd is the Price Per Yard ($/yd)
  • P is the price ($)
  • L is the total length (yd)

To calculate the Price Per Yard, divide the total price by the total length in yards.

How to Calculate Price Per Yard?

The following steps outline how to calculate the Price Per Yard.

  1. First, determine the price ($). 
  2. Next, determine the total length (yd). 
  3. Next, gather the formula from above = PPyd = P / L.
  4. Finally, calculate the Price Per Yard.
  5. After inserting the variables and calculating the result, check your answer with the calculator above.

Example Problem : 

Use the following variables as an example problem to test your knowledge.

price ($) = 90023

total length (yd) = 1231

PPyd = 90023 / 1231 ≈ 73.12998 dollars per linear yard, displayed as $73.13/yd. At a constant rate, this price per yard can be used to estimate a total cost for another length.

FAQs

How do I convert the Price Per Yard to Price Per Meter?

Divide the price per yard by 0.9144 to get the price per meter, because 1 yd = 0.9144 m exactly. For example, 15 currency units per yard ÷ 0.9144 ≈ 16.4042 per meter. Multiply a price per meter by 0.9144 to get a price per yard.

Can I use the Price Per Yard formula for materials other than fabric?

Yes, the Price Per Yard formula can be used for any material sold by linear yardage, such as carpeting, landscaping materials, or wire, as long as you have the total price and total length in yards.

Is there a difference between linear yard and square yard calculations?

Yes, a linear yard measures length only, while a square yard measures area (length x width). The Price Per Yard formula provided is for linear yards, which would not apply directly to materials sold by the square yard.

What if my measurements are not in yards?

Select the actual input length unit (yd, ft, in, m or cm); the calculator converts it to yards. For a manual check, divide feet by 3 or inches by 36, or divide meters by 0.9144. Price per yard always refers to a linear yard.