Convert floors climbed to miles, such as StairMaster floors, at 10 ft per floor or your own height, or convert miles, feet or stair steps back to floors.
Related Calculators
- Feet to Stories Calculator
- Stories to Feet Calculator
- Vertical Distance Calculator
- Height Distance Calculator
- Miles to Degrees Calculator
- All Unit Converters
Calculator Functions
| Function | What it does | What it requires |
|---|---|---|
| Floors to vertical distance | Converts a number of floors climbed to vertical distance in miles, kilometers, feet, meters and stair steps | Requires the number of floors and a height per floor |
| Vertical distance to floors | Converts a vertical distance to the equivalent number of floors | Requires the vertical distance in miles, kilometers, feet, meters or stair steps and a height per floor |
Height per floor is 10 ft unless changed. The other choices are 9 ft, 12 ft, 14 ft or a custom height in feet or meters. Partial floors are allowed, and an optional setting shows results to 2, 3 or 4 decimal places.
Floors to Miles Formulas
| M | Vertical distance (miles) |
| F | Number of floors |
| H | Height per floor (ft), 10 unless changed |
| 5,280 | Feet in one mile [1] |
Floors to vertical distance
The main formula applies directly. At 10 ft per floor, 100 floors is 100 × 10 ÷ 5,280 = 0.1894 miles, and 110 floors is 1,100 ft or 0.2083 miles. At 12 ft per floor, 10 floors is 120 ft or 0.0227 miles. The table uses 10 ft per floor.
| Floors | Feet | Miles |
|---|---|---|
| 10 | 100 | 0.0189 |
| 20 | 200 | 0.0379 |
| 30 | 300 | 0.0568 |
| 50 | 500 | 0.0947 |
| 60 | 600 | 0.1136 |
| 70 | 700 | 0.1326 |
| 100 | 1,000 | 0.1894 |
| 110 | 1,100 | 0.2083 |
| 150 | 1,500 | 0.2841 |
| 200 | 2,000 | 0.3788 |
| 300 | 3,000 | 0.5682 |
| 500 | 5,000 | 0.9470 |
| 528 | 5,280 | 1.0000 |
Vertical distance to floors
D is the vertical distance in the same unit as the height per floor. One mile is 5,280 ÷ 10 = 528 floors at 10 ft per floor, 440 floors at 12 ft and about 586.67 floors at 9 ft. Distance can also go in as stair steps, counted at 7 inches (0.1778 m) of rise each, which is the tallest riser the ADA Standards allow on a stairway [2]. At that rise a 10 ft floor is about 17 steps, and 200 steps is 200 × 7 ÷ 12 = 116.67 ft, or 11.67 floors.
| Stair steps | Feet climbed | Floors at 10 ft |
|---|---|---|
| 100 | 58.33 | 5.83 |
| 200 | 116.67 | 11.67 |
| 300 | 175.00 | 17.50 |
| 400 | 233.33 | 23.33 |
| 500 | 291.67 | 29.17 |
| 1,000 | 583.33 | 58.33 |
Limits of This Estimate
- A floor is not a fixed unit of length. The 9, 10, 12 and 14 ft choices are assumptions, and a measured floor-to-floor height gives a better answer.
- A stair machine counts a floor at whatever height its console assigns, so the figure in the machine’s manual belongs in the custom height.
- The result is vertical climb. It is not the walking distance along a staircase and not a horizontal distance.
- Stair steps assume a 7 inch riser. Risers on real stairs are between 4 and 7 inches under the ADA Standards [2], so the same climb can take more steps.
Sources
- NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement: 5,280 feet in a mile and the exact foot and mile in meters
- U.S. Access Board, ADA Accessibility Standards, section 504.2 Treads and Risers: riser height of 4 inches minimum and 7 inches maximum
