Convert mole fraction to ppm, or ppm and ppmv back to mole fraction, with mole percent, ppb and ppt results for chemistry and gas mixtures.

Decimal from 0 to 1, e.g. 0.01. Mole basis only; mass ppm (mg/kg) needs molar masses.

Optional settings


Related Calculators

Calculator Functions

FunctionWhat it doesWhat it requires
ppm from mole fractionConverts a mole fraction to parts per millionRequires the mole fraction as a decimal from 0 to 1
ppm from mole percentConverts a mole percent to parts per millionRequires the mole percent, from 0 to 100
Mole fraction from ppm (ppmv)Converts parts per million, or ppmv for a gas, to a mole fractionRequires the ppm value, from 0 to 1,000,000

Every result lists the same amount as a mole fraction, mole percent, ppm (ยตmol/mol), ppmv, ppb (nmol/mol) and ppt (pmol/mol), and as a proportion such as 1 in 2,000.

Mole Fraction to PPM Formulas

ppm = x ร— 1,000,000 [1]
ppmParts per million by amount of substance, the same number as ยตmol/mol
xMole fraction: moles of the component รท total moles in the mixture

A mole fraction counts molecules of one component per molecule of mixture, and ppm counts them per million molecules [1], so the two differ only by a factor of one million.

ppm from mole fraction

A mole fraction of 0.0005 is 0.0005 ร— 1,000,000 = 500 ppm, or 1 molecule in 2,000.

Mole fractionMole percentppm
0.0000010.0001%1
0.000010.001%10
0.00010.01%100
0.0010.1%1,000
0.011%10,000
0.110%100,000
1100%1,000,000

ppm from mole percent

ppm = mol % ร— 10,000

A mole percent is the mole fraction times 100, so each 1 mol % is 10,000 ppm and 2 mol % is 20,000 ppm. Air that is 78.09% nitrogen holds 780,900 ppm of it [1].

Mole fraction from ppm (ppmv)

x = ppm รท 1,000,000

413 ppm of carbon dioxide in dry air is a mole fraction of 0.000413 [1]. For a gas mixture, ppmv is entered the same way, because the volume fraction of an ideal gas equals its mole fraction.

Limits of This Estimate

  • The conversion is on a mole (amount of substance) basis only. Mass-based ppm such as mg/kg, and concentrations such as mg/L or molarity, need molar masses or a density and are not converted here.
  • ppmv matches mole-based ppm only as far as the gases behave ideally. Real gases depart from this slightly [1].
  • ppb here means one part in 10โน and ppt one part in 10ยนยฒ. These names are not used the same way everywhere, which is why NIST recommends writing ยตmol/mol or nmol/mol instead [2].

Sources

  1. NOAA Global Monitoring Laboratory, How we measure background CO2 levels on Mauna Loa: ppm as molecules per million molecules of air, and why ppmv is not always a mole fraction
  2. NIST, Guide for the Use of the International System of Units (SP 811), Section 7.10.3: ppm, ppb and ppt, and the SI forms that replace them