Enter the values of two different vectors into the calculator. The calculator will evaluate and display the resultant vector.
- Unit Vector Calculator
- Vector Addition Calculator
- Vector Length Calculator
- Vector Subtraction Calculator
- Resultant Force Calculator
- Resultant Velocity Calculator
- Vertical & Horizontal Component Calculator
- Resultant Acceleration Calculator
Resultant Vector Formula
The following formula is used to calculate the resultant vector from the summation of two different vectors.
X,Y,Z = X (vector 1) + X (vector 2), Y1 + Y2, Z1 + Z2
- Where X, Y, and Z are the coordinate values of the new vector
- X1,Y1,Z1 are the values of the first vector
- X2,Y2,Z2 are the values of the second vector
Explained in words, this formula is the summation of each individual vector coordinate to yield 3 resultant coordinates of the new vector.
What Are Resultant Vectors?
A resultant vector is the result of either the addition, subtraction, multiplication, or division of two or more vectors to yield a new vector. This new vector is defined as the resultant vector. The calculator below performs the summation of two vectors, but other vector operations can be explored with the calculators linked below.
Subtraction of Resultant Vectors
In order to subtract two or more vectors, the same formula as above would be used, except each vector component would be subtracted from one another instead of added. For example, if vector 1 had an x-component of 3 and vector 2 had an x-component of 1, then the resultant vector from subtraction is 3-1 = 2.
Multiple Resultant Vectors
In some cases, there may be a situation in which the resultant vector of 3 or more vectors is required. In those cases, the formulas displayed above would just be adjusted to account for the additional coordinates.
For example, if there were 3 vectors that needed to be added together, the resultant vector would be the sum of each of the components. So if the x-component of the vector was 3,4 and 5 respectively, the sum of those would equal the new resultant vector x- component (3+4+5 = 12).
Uses of Resultant Vectors
Resultant vectors are most often used in physics to understand the combination of the values of 2 or more forces, velocities, or physical characteristics of matter. For example, when there are two or more forces acting on the same object, a single resultant vector can be used as an equivalent force as the two individual forces. This makes further calculations much more simple.
Resultant Vector Example
How to calculate a resultant vector?
- First, determine the values of the first vector.
For this example problem, the values of the first vector are 10,13, and 3 for the x,y, and z coordinates of the vector respectively.
- Next, determine the values of the second vector.
In this case, the second vector has values of 5,3, and 1 for the coordinates in the same order.
- Finally, calculate the resultant vector.
Summing the individual vector components yields a new vector of:
X = 10 + 5 = 15
Y = 13 + 3 = 16
Z = 3 + 1 = 4
(15,16,4)
