ug/g to ppm Converter (Microgram per Gram & mg/kg)

Convert µg/g to ppm by mass, or ppm back to µg/g, and see the same concentration as mg/kg, ng/g (ppb), percent by mass and mg/g.

Quick overview: For concentrations reported on a mass basis, 1 µg/g = 1 ppm.

1 µg/g = 1 ppm
0.5 µg/g = 0.5 ppm
10 µg/g = 10 ppm
250 µg/g = 250 ppm

Both units describe the same mass fraction, so the number does not change during the conversion.

µg/g to ppm Formula

The following formula is used to convert micrograms per gram (µg/g) to parts per million (ppm) for mass-based concentrations.

ppm = μ g / g

Variables:

ppm is the concentration in parts per million by mass
µg/g is the concentration in micrograms of analyte per gram of sample

To convert µg/g to ppm, copy the value directly. Since both units represent the same mass fraction, the numerical result remains unchanged.

What is µg/g to ppm Conversion?

Micrograms per gram (µg/g) and parts per million (ppm) are equivalent when describing concentration on a mass basis. A value of 1 µg/g means there is 1 microgram of a substance in 1 gram of material. This is the same ratio as 1 part per million, because 1 microgram is one-millionth of a gram. As a result, laboratories, environmental reports, and analytical test results may use either unit interchangeably for solids, powders, foods, soils, and other mass-based samples.

How to Convert µg/g to ppm?

The following steps outline how to convert µg/g to ppm.

First, determine the concentration in micrograms per gram (µg/g).
Recognize that 1 µg/g is equal to 1 ppm for mass-fraction measurements.
Set the ppm value equal to the µg/g value. The calculator also shows mg/kg, ng/g (ppb), percent and mg/g.
After inserting the value and calculating the result, check your answer with the calculator above.

Example Problem:

Use the following example to test your knowledge.

Concentration = 7.5 µg/g

Equivalent concentration = 7.5 ppm. This is 7.5 mg/kg, 7,500 ppb, 0.00075% or 0.0075 parts per thousand by mass. Total-sample mass fractions range from 0 to 1,000,000 ppm (100%). Volume- or amount-based ppm cannot be substituted without the corresponding basis information.

µg/g to ppm Conversion Table

The table below gives a few sample conversions using the rule ppm = µg/g.

Sample type	Concentration (µg/g)	Equivalent in ppm
General solid	1 µg/g	1 ppm
Soil sample	10 µg/g	10 ppm
Food product	0.5 µg/g	0.5 ppm
Animal feed	250 µg/g	250 ppm
Water (by mass)	0.05 µg/g	0.05 ppm

In practice, converting µg/g to ppm is one of the simplest concentration conversions because the value stays the same. This makes it easy to compare lab reports, product specifications, environmental thresholds, and regulatory limits that may be written in either unit.