Calculate bubble flow meter rate from measured volume and time, or use tube geometry to find flow and standardize gas flow to sccm, SLM, and g/min.
Related Calculators
- Compressibility Calculator
- Vacuum Pressure Calculator
- Cylinder Pressure Calculator
- Compressed Water Calculator
- All Physics Calculators
Bubble Flow Meter Rate Formula
The following two example problems outline the steps and information needed to calculate the Bubble Flow Meter Rate.
BFR = MV / T *60
Variables:
- BFR is the Bubble Flow Meter Rate (mL/min)
- MV is the measured volume (mL)
- T is the measured time (seconds)
To calculate the bubble flow meter, divide the measured volume by the measured time, then multiply by 60.
How to Calculate Bubble Flow Meter Rate?
The following steps outline how to calculate the Bubble Flow Meter Rate.
- First, determine the measured volume (mL).
- Next, determine the measured time (seconds).
- Next, gather the formula from above = BFR = MV / T *60.
- Finally, calculate the Bubble Flow Meter Rate.
- After inserting the variables and calculating the result, check your answer with the calculator above.
Example Problem :
Use the following variables as an example problem to test your knowledge.
measured volume (mL) = 400
measured time (seconds) = 300
BFR = MV / T *60 = ?
