Calculate how much peat moss you need in cubic yards and feet from area and depth, with typical lawn and garden-bed depths, or solve for area or depth.

Lawns usually get 1/4โ€“1/2 in. For beds, about 1 in of peat per 4 in of soil you till.

Optional settings


Related Calculators

Calculator Functions

FunctionWhat it doesWhat it requires
Required peat moss volumeFinds how much loose peat moss covers an area at a chosen depth, in cubic yards, cubic feet and cubic metresRequires the total area and the layer depth
Covered areaFinds how much ground a known amount of peat moss coversRequires the loose peat moss volume and the layer depth
Layer depthFinds how thick a layer a known amount makes over an areaRequires the total area and the loose peat moss volume

Area is entered in ftยฒ, ydยฒ, mยฒ or acres, depth in inches, feet, centimetres or millimetres, and volume in ydยณ, ftยณ, mยณ or litres. The depth field offers four starting points: ยผ inch and ยฝ inch for topdressing a lawn, and 1 inch or 2 inches for mixing into a bed.

Peat Moss Coverage Formulas

V = A ร— D รท 324
VLoose peat moss volume (cubic yards)
AArea to cover (square feet)
DLayer depth (inches)
32412 inches per foot ร— 27 cubic feet per cubic yard

Required peat moss volume

Topdressing a 1,000 ftยฒ lawn at ยผ inch takes 1,000 ร— 0.25 รท 324 = 0.77 ydยณ, which is 20.8 ftยณ. A 200 ftยฒ bed with a 3 inch layer takes 200 ร— 3 รท 324 = 1.85 ydยณ, or 50 ftยณ. Multiply cubic yards by 27 to get the cubic feet printed on most bags and bales.

For depth, Clemson Extension advises keeping a lawn topdressing light, at no more than ยฝ inch of material in one application, because a thicker layer can stunt or shade the grass [1]. For beds and new lawns, University of Missouri Extension suggests spreading 1 to 3 inches of peat, compost or well-rotted manure and working it into about 6 inches of soil [2].

Covered area

A = V ร— 324 รท D

Ten cubic feet of loose peat moss is 10 รท 27 = 0.37 ydยณ. Spread ยฝ inch deep it covers 0.37 ร— 324 รท 0.5 = 240 ftยฒ.

Layer depth

D = V ร— 324 รท A

One cubic yard spread over 500 ftยฒ makes a layer 1 ร— 324 รท 500 = 0.65 inch deep, or about 1.6 cm.

Limits of This Estimate

  • The volume is loose, fluffed peat moss. Compressed bales expand when broken up, so compare the result with the expanded or loose-fill figure on the bale, not its compressed size.
  • Nothing is added for waste, settling or uneven ground. Rounding up to the next whole bag or bale covers small shortfalls.
  • The depth suggestions in the calculator are rules of thumb, and the right depth depends on the soil and the plants. These estimates are based on the best available data and estimations.

Sources