Solve slurry solids by mass, solid mass, total slurry mass, or derive weight and volume percentages from solid, liquid, and measured slurry densities.

Required inputs are the visible fields for the selected mode; fields labeled optional may be left blank. Mass and total-slurry entries must use the same unit. The density method assumes two phases and additive phase volumes.

Percent Solids In Slurry Formula

The following equation is used to calculate the Percent Solids In Slurry.

PSS = MS / MSL × 100
  • Where PSS is the percent solids in slurry (%)
  • MS is the mass of all solids in the slurry
  • MSL is the mass of the entire slurry

To calculate the percent solids in a slurry, divide the mass of the solids by the mass of the slurry, then multiply by 100.

What is Percent Solids In Slurry?

Definition:

A percent solids in a slurry is the ratio of the mass of solids to the mass of an entire slurry solution.

How to Calculate Percent Solids In Slurry?

Example Problem:

The following example outlines the steps and information needed to calculate Percent Solids In Slurry.

First, determine the mass of the solids. In this example, the mass of the solids is found to be 400 grams.

Next, determine the mass of the total slurry. For this problem, the total slurry mass is measured to be 800 grams.

Finally, calculate the percent solids in slurry using the formula above:

%S = MS / MSL * 100

%S = 400 / 800 * 100

%S = 50%