Convert the longer measured foot to a generic Mondopoint ski-boot starting size while keeping manufacturer sizing and boot-sole length separate.
Ski Boot Mondopoint Method
Mondopoint is based on measured foot length. This calculator converts the measurement to centimeters and rounds to the nearest half size as a shopping starting point.
How the Calculation Works
The calculator applies the displayed published chart, lookup, or starting-point relationship to the visible required inputs.
How to Use This Calculator
- Keep the listed result selected in the Solve for menu.
- Enter or select every visible required input and unit.
- Select Calculate and review the starting recommendation and supporting detail.
- Use Reset before starting a new scenario.
Worked Example
A longer foot measuring 25.7 cm converts to raw Mondopoint 25.7 and rounds to a generic 25.5 starting size. The exact brand and model chart may group or label sizes differently.
Input and Result Guide
| Item | How to use it |
|---|---|
| Foot measurement | Measure both bare feet while standing and use the longer length. |
| Mondopoint | A centimeter-based boot-size starting point, not the outside shell length. |
| Brand chart | Check the exact manufacturer and model because half-size labels and shared shells vary. |
| BSL | Read boot-sole length in millimeters from the actual boot for binding work. |
Interpreting the Result
A precise length conversion does not settle width, instep volume, heel hold, liner compression, flex, or shell fit. A trained boot fitter should confirm those elements.
Assumptions and Limitations
The calculator does not convert street-shoe size and does not estimate BSL. Commercial rounding and shell sharing vary across brands and models.
Common Questions
Why is this a starting recommendation?
Equipment fit varies by model, construction, conditions, and personal preference. The result narrows the search; it does not replace the exact product chart or a professional fitting.
Will my last successful calculation be restored?
Yes. The calculator saves enabled source values and the successful result in this browser. Reset clears that saved state.
Sources
ISO 9407 shoe sizes—Mondopoint system; manufacturer-specific alpine boot sizing and fitting charts.